TySOM-3A-ZU19EG Embedded Prototyping Board

TySOM-3A-ZU19EG is a compact SoC prototyping board featuring Zynq® UltraScale+™ MPSoC device which provides 64-bit processor scalability while combining real-time control with soft and hard engines for SoC prototyping solution, IP verification, graphics, video, packet processing and early software development. The main advantage of Xilinx Zynq Ultrascale+ ZU19EG-FFVB1517 MPSoC over other Zynq MPSoC devices is that it carries the largest FPGA in the Zynq® UltraScale+™ MPSoC family with over a million logic cells. It includes a quad-core ARM® Cortex-A53 platform running up to 1.5GHz. Combined with dual-core Cortex-R5 real-time processors, a Mali-400 MP2 graphics processing unit, and 16nm FinFET+ programmable logic, EG devices have the specialized processing elements needed to excel in next-generation wired and 5G wireless infrastructure, cloud computing, and Aerospace and Defense applications.

 

TySOM-3A-ZU19EG is designed to assure flexibility in selecting peripherals because of leveraging all the features of the Zynq UltraScale+ ZU19EG- FFVB1517 MPSoC chip. This prototyping board contains 8GB DDR4 Memory for the Programmable Logic (PL) and also 8GB DDR4 SODIMM Memory for the Processing System (PS). This board includes 2 Gb NAND Memory and supports up to 32GB of SSD storage in Micro-SD card. It also features a 512Mb QSPI Flash Memory. Communication and networking is enabled by ×2 Gigabit Ethernet, Wi-Fi & Bluetooth, CAN, Pmod, 4× USB 3.0, USB to UART Bridge, USB 2.0 OTG, JTAG USB, SATA, QSFP+ and PCIe x1 GEN3/4 connectors. Multimedia interfaces are provided using DisplayPort, HDMI IN/OUT. To expand the peripherals, 2× FMC VITA 57.1-2010 compliant are provided on the board. Thus, additional devices can be connected as FMC Daughter Cards that are provided by Aldec and other vendors.

BLOCK DIAGRAM

TySOM-3A-ZU19EG Embedded Prototyping Board

Chipset / SoC

  • Xilinx Zynq UltraScale+ ZU19EG- FFVB1517 MPSoC
  • Quad-core ARM Cortex-A53 as an Application Processing Unit running up to 1.5GHz
  • Dual-core ARM Cortex-R5 as a Real-Time Processing Unit
  • Mali-400 MP2 graphics processing unit
  • 2x XADC - 12-bit, 1MSPS Analog to Digital converter
  • FPGA: ZU19EG
  • 1,143K Logic Cells, 1,045K Flip-Flops, 70.6Mb RAM, 1968 DSP

Memory

  • 8GB DDR4 SODIMM Memory for the Processing System and 8GB for PL
  • 2 Gb NAND Memory
  • Micro-SD support
  • 512Mb QSPI Flash Memory
  • 64 Kb EEPROM

Interfaces

  • 2× Gigabit Ethernet PHY DP83867CR
  • Wi-Fi/Bluetooth module (WL1837MOD)
  • PCIe x1 GEN3/4 (Root Complex or Endpoint)
  • 4x USB 3.0 ports
  • SATA
  • CAN
  • QSFP+
  • 2x8 IOs Pmod connector
  • USB 2.0 OTG (micro USB connector)
  • UART to USB bridge (CP2103) with Mini-USB B type connector
  • JTAG USB Module for Zynq PL

Multimedia

  • HDMI 2.0 Out
  • HDMI 2.0 IN
  • DisplayPort

Miscellaneous

  • 4x User Dip Switches
  • 5x User LEDs
  • Reset Pushbuttons for PL & PS
  • Accelerometer
  • Temperature Sensor
  • SYSMON
  • Curent monitor

Dimensions

Ask Us a Question
x
Ask Us a Question
x
Captcha ImageReload Captcha
Incorrect data entered.
Thank you! Your question has been submitted. Please allow 1-3 business days for someone to respond to your question.
Internal error occurred. Your question was not submitted. Please contact us using Feedback form.
We use cookies to ensure we give you the best user experience and to provide you with content we believe will be of relevance to you. If you continue to use our site, you consent to our use of cookies. A detailed overview on the use of cookies and other website information is located in our Privacy Policy.