What is the DO-254 guidance regarding requirements traceability?

Answer

Requirements traceability as defined in the RTCA/DO-254 document is quoted as follows:

RTCA/DO-254 page 66 10.4.1. Traceability Data Hardware traceability establishes a correlation between the requirements, detailed design, implementation and verification data that facilitates configuration control, modification and verification of the hardware item. Hardware traceability data should include:

  1. A correlation between the system requirements allocated to hardware and the requirements.

  2. A correlation between the requirements and the hardware detailed design data.

  3. A correlation between the hardware detailed design data and the as-built hardware item or assembly.

  4. A correlation between the requirements, including derived hardware requirements, and detailed design data and the verification procedures and results.

  5. The results of a traceability analysis.

In other words, this means that the applicant must do the following:

  • Capture and manage FPGA requirements from the system spec

  • Establish links from requirements back to system spec

  • Establish links from requirements to conceptual design data

  • Establish links from requirements to detailed design data and implementation

  • Establish links from requirements to simulation and device testing results

  • Capture derived requirements and establish links to the detailed design data, implementation and results

  • Generate traceability reports

  • Manage and baseline requirements data and traceability links with appropriate configuration control

Ask Us a Question
x

Ask Us a Question

x
Captcha ImageReload Captcha
Incorrect data entered.
Thank you! Your question has been submitted. Please allow 1-3 business days for someone to respond to your question.
Internal error occurred. Your question was not submitted. Please contact us using Feedback form.