High Performance SoC’s Pushing the Limit of Prototyping Boards Aldec HES-7 Backplane, a Cost-Effective Solution Bill Jason P. Tomas, Product Engineer, Hardware Division Like(0) Comments (0) As newer generation FPGAs provide users higher logic capacity for system design, SoC's are concurrently growing more complex with the integration of high speed serial protocols, multi-core processors, and media interfaces. These SoC designs are pushing the limits of FPGA utilization, and growing up to the multi-million ASIC gate count, which itself is steadily increasing. Design teams need to be able to provide enough “wiggle room” in their off-the-shelf prototyping boards to be able to reuse HDL for future projects and expansion to keep up with the growing trend. This puts designers into a bind, since they need to purchase a prototyping board which can handle their current design, while providing them enough capacity to grow in the future. This may not be an issue for larger companies who have the appropriate resources to build their own development platforms or purchase costly off-the-shelf board, but for many companies it is. The Aldec HES-7 backplane has four expansion slots, each capable of housing a single HES-7 board with up to 24M ASIC gates. This allows designers to create designs using a single prototyping platform, and expand capacity only when needed. This can greatly reduce project cost since companies need only purchase the logic capacity they require. At the 2013 Design Automation Conference (DAC), Aldec will provide an overview of the backplane board, discuss the advantages of the HES-7 scalability, and how it is even possible to serially daisy chain two backplane boards together for up to 144M ASIC gates. Visit www.aldec.com/dac2013 to learn more and to register for a one-on-one presentation.