Tutorials

-OR-
リセット

Results

Name Products Type Action
DO-254 Requirements Traceability Tutorial   
This tutorial provides step-by-step instructions on how to use Spec-TRACER to meet the DO-254 objectives for requirements traceability.
Spec-TRACER チュートリアル
Enabling GPIO Interrupts Tutorial TySOM-1-7Z030   
An interrupt is a signal that temporarily halts the processor’s current activities and demands immediate attention. The processor saves its current state and executes an interrupt service routine to address the reason for the interrupt. Real-time designs require interrupts because many systems will have a number of inputs (e.g. keyboards, mouse, pushbuttons etc.) that will require processing. Inputs from these devices are generally asynchronous to the execution of running processes or tasks, so you cannot always predict when the event will occur. Using interrupts enables the processor to continue processing until an event occurs, at which time the processor can address the event. This interrupt-driven approach also speeds up the response time. This basic GPIO interrupt design is intended to enable GPIO interrupts to users on the TySOM-1-7Z030 board. The standard flow includes several stages to create a hardware platform for the Zynq-7000 based board.
TySOM™ EDK チュートリアル
HDE based debugging   
Learn how to debug your code in Riviera-PRO
Riviera-PRO チュートリアル
How to add a custom IP core into Aldec TySOM board hardware and update SDx platform   
One way of using TySOM board is using it in Xilinx SDx tool which provides mechanism to convert C/C++ functions to HDL and accelerate them in the FPGA part. This possibility demonstrates the power of Zynq chips and Aldec boards what is out of reach for standard processors. Additionally FPGA chips consume less energy than processors, so the boards can be used in embedded application with battery power supply. Some projects may require using a custom hardware IP cores. These IP cores should be added into the hardware platform and be available in SDx tool. Therefor it is necessary to update Aldec TySOM boards SDx platforms with the custom IP cores. This document provides a comprehensive instruction of adding the custom IP cores into hardware platform and updating SDx platform.
TySOM™ EDK チュートリアル
How to add a custom IP core into Aldec TySOM board hardware and update SDx platform   
Aldec has prepared ready-to-use SDx platforms for its TySOM users to make it easy for them to develop their design. These platforms include all HW and SW the user needs to run the peripherals on the board. However, you might need to add your own custom IP to these platforms. So, in this tutorial, you will learn how to add a custom IP into TySOM SDx platform.
TySOM-3, TySOM-2, TySOM-2A, TySOM-1, TySOM-3A チュートリアル
How to configure Wi-Fi Direct on TySOM board   
There are WiFi/Bluetooth devices on TySOM boards to be used for networking purposes. TySOM board needs to be configured for such applications. In this tutorial, you will learn how to configure Wi-Fi direct on TySOM board and use it for a networking project.
TySOM-2A, TySOM™ EDK チュートリアル
How to create Wi-Fi access point on TySOM board   
This document contains a comprehensive instruction about creating Wi-Fi access point and configuring it in different wireless communication standards. All steps were checked with TySOM-2A-7Z030 boards. Other boards may require some modification in provided instruction.
TySOM™ EDK チュートリアル
How to create Wi-Fi access point on TySOM board   
This document contains a comprehensive instruction about creating a Wi-Fi access point and configuring it in different wireless communication standards. All steps were checked with TySOM-2A-7Z030 boards. Other boards may require some modification in provided instruction.
TySOM-2A, TySOM™ EDK チュートリアル
IoT Demo Application Tutorial - TySOM-1-7Z030   
Internet usage has expanded to a new mode: device to device. This new mode is used in Internet of Things (IoT) applications and devices are called IoT gateways. The Aldec TySOM contains a Zynq-7000 SoC with ARM processor and a variety of interfaces to be utilized as an IoT gateway device. This document provides all necessary information about the Aldec IoT demo project with the TySOM-1-7Z030 board.
TySOM-1, TySOM™ EDK チュートリアル
LEDを点滅させるためのハードウェアとソフトウェア プロジェクトの作成 TySOM -1-7Z030   
このチュートリアルでは、Xilinx Vivado Design Suiteでハードウェアプロジェクトを作成し、Xilinx SDKでTySOM-1-7Z030ボード用のソフトウェアプロジェクトを作成する方法を学習します。最初にハードウェアから作成し、スタンドアロンOSを使用してオンボードLEDを点滅させるソフトウェアアプリケーションを作成します。Zynqアーキテクチャでは、ベアメタルモードまたは組込みLinux OSプラットフォームを使用してデザインを実装できます。
TySOM-1, TySOM™ EDK チュートリアル
Library Management   
Learn how to manage Libraries in Riviera-PRO
Riviera-PRO チュートリアル
LinaroからLinux OS のビルドとコンフィグレーション   
このドキュメントでは、Analog Devices LinuxカーネルとLinaroソースを使用してAldec TySOMプラットフォーム用の組み込みLinux OSを構築し、Linuxファイルシステムを作成するプロセスについて説明します
TySOM™ EDK チュートリアル
Preparing a Custom Linux Filesystem with Xilinx Petalinux Tools   
The Petalinux provides all necessary tools to build a custom operating system for Embedded solutions for the board with Xilinx Zynq chips.
TySOM™ EDK チュートリアル
Programming the TySOM-1-7Z030 Board Using a MicroSD Card   
In this tutorial, you will learn how to run your hardware and software application on the TySOM-1-7Z030 board using a microSD card as the boot method. The microSD card is used when you want your application to be persistent despite any power cycling. In this situation, the board will boot from the microSD card.
TySOM™ EDK チュートリアル
Report Manager Tutorial   
This tutorial provides step-by-step instructions on how to create reports using the Spec-TRACER Report Manager. Reports make it easier for users to be able to show information relative to requirement specifications introduced into the Spec-TRACER Client.
Spec-TRACER チュートリアル
Riviera-PRO GUI基本シミュレーション   
Riviera-PROによるシミュレー ションの基本フローをGUIで実行する方法について、Verilog、VHDLデザイン両方の手順で解説します。
Riviera-PRO チュートリアル
Riviera-PROによるMatlabインターフェース   
Riviera-PROでどのようにMATLAB®インターフェースを使用するのかを解説します。
Riviera-PRO チュートリアル
Riviera-PROによるSimulinkインターフェース   
Riviera-PROでどのようにSimulink®インターフェースを使用するのかを解説します。
Riviera-PRO チュートリアル
Riviera-PROバッチモード・シミュレーション   
Riviera-PROによるバッチモード・シミュレー ションを実行する方法について解説します。
Riviera-PRO チュートリアル
Riviera-PRO波形ウィンドウ   
Riviera-PROでどのように波形ウィンドウを使用するのかを解説します。
Riviera-PRO チュートリアル
88 results (page 3/5)
Ask Us a Question
x
Ask Us a Question
x
Captcha ImageReload Captcha
Incorrect data entered.
Thank you! Your question has been submitted. Please allow 1-3 business days for someone to respond to your question.
Internal error occurred. Your question was not submitted. Please contact us using Feedback form.
We use cookies to ensure we give you the best user experience and to provide you with content we believe will be of relevance to you. If you continue to use our site, you consent to our use of cookies. A detailed overview on the use of cookies and other website information is located in our Privacy Policy.