Resources

-OR-
Reset

Results

Name Products Type Action
Basic UART Interface Tutorial TySOM-1-7Z030   
In this tutorial, you will learn how to use UART to interface the TySOM-1-7Z030 board with other systems. The UART interface enables us to view serial output from the board which can be useful for monitoring. This project has both a hardware and software part.
TySOM-1, TySOM™ EDK Tutorials
Building and Configuring a Linux OS using the Yocto Project - TySOM-1-7Z030   
This document describes the process for building an embedded Linux OS for the Aldec TySOM platform using the Yocto project, an open source collaboration project for creating custom Linux-based systems.
TySOM-1, TySOM™ EDK Tutorials
Creating a Hardware and Software Project to Blink LEDs TySOM -1-7Z030   
In this tutorial, you will learn how to create a hardware project in Xilinx’s Vivado Design Suite and create a software project in Xilinx’s SDK for the TySOM-1-7Z030 board. First you will create the hardware part, then you will create a software application to blink the onboard LEDs using standalone OS. In the Zynq architecture, you are able to implement the design either in a bare metal mode or by using an embedded Linux OS platform.
TySOM-1, TySOM™ EDK Tutorials
Creating a Hardware and Software Project to Blink LEDs using DIP Switches TySOM -1-7Z030   
In this tutorial, you will learn how to create a hardware project in Xilinx’s Vivado Design Suite and create a software project in Xilinx’s SDK for the TySOM-1-7Z030 board. First you will create the hardware part, then you will create a software application to blink the onboard LEDs using onboard switches. At the end of this tutorial, you will also learn how to program the project onto the TySOM-1-7Z030 board using a JTAG programmer. To program the FPGA using a microSD card, you can follow the “Programming the TySOM-1-7Z030 board using a microSD card guide”.
TySOM-1, TySOM™ EDK Tutorials
How to add a custom IP core into Aldec TySOM board hardware and update SDx platform   
Aldec has prepared ready-to-use SDx platforms for its TySOM users to make it easy for them to develop their design. These platforms include all HW and SW the user needs to run the peripherals on the board. However, you might need to add your own custom IP to these platforms. So, in this tutorial, you will learn how to add a custom IP into TySOM SDx platform.
TySOM-3, TySOM-2, TySOM-2A, TySOM-1, TySOM-3A Tutorials
How to build an FPGA design for Aldec TySOM boards using board definition in Xilinx Vivado   
One way of preparing projects for the TySOM board is using the Xilinx Vivado tool which enables to create, synthesize, perform timing analysis and implement systems for FPGA platforms. Using Vivado board definitions that have been added to a board repository allows to faster-creating systems. After selecting a specific board, the project is configured with the predefined interface for that board and the Vivado design tools provide designer assistance to IP customization and creating IP integrator designs. In this tutorial, you will learn how to create a design for TySOM board using Vivado board files.
TySOM-3, TySOM-2, TySOM-2A, TySOM-1, TySOM-3A Tutorials
How to rebuild Aldec demo project in SDx   
Every TySOM board is different, contains different interfaces and connectors and requires a unique Hardware platform. Aldec prepared special SDx platforms to simplify using the TySOM boards. Every SDx platform contains also a set of simple examples provided by Xilinx in xfopencv library which can be used onboard. All projects contains a C++ function which is converted to the FPGA. Aldec customers are also provided with a set of our demo project which they can use as a starting point in developing their applications. This document will demonstrate how to build examples from SDx platforms and how to build Aldec demo project in Xilinx SDx.
TySOM-3, TySOM-2, TySOM-2A, TySOM-1, TySOM-3A Tutorials
How to use Aldec TySOM boards in Xilinx SDx   
One way of using TySOM board is using it in Xilinx SDx tool which provides a mechanism to convert C/C++ functions to HDL and accelerate them in the FPGA part. This possibility demonstrates the power of Zynq chips and Aldec boards what is out of reach for standard processors. Additionally FPGA chips consume less energy than processors, so the boards can be used in embedded application with battery power supply. This document provides information on how to use Aldec TySOM board in Xilinx SDx tool.
TySOM-3, TySOM-2, TySOM-2A, TySOM-1, TySOM-3A Tutorials
How to use TySOM boards in Xilinx Vivado   
This document will focus on using TySOM board in Xilinx Vivado tool which enables adding a custom hardware IP core to the project. This possibility demonstrates the power of Zynq chips and Aldec boards what is out of reach for standard processors. In case of using SDx, we have prepared another tutorial on how to use TySOM boards in Xilinx SDx.
TySOM-3, TySOM-2, TySOM-2A, TySOM-1, TySOM™ EDK, TySOM-3A Tutorials
IoT Demo Application Tutorial - TySOM-1-7Z030   
Internet usage has expanded to a new mode: device to device. This new mode is used in Internet of Things (IoT) applications and devices are called IoT gateways. The Aldec TySOM contains a Zynq-7000 SoC with ARM processor and a variety of interfaces to be utilized as an IoT gateway device. This document provides all necessary information about the Aldec IoT demo project with the TySOM-1-7Z030 board.
TySOM-1, TySOM™ EDK Tutorials
TySOM-1-7Z030 Overview    
The TySOM-1-7Z030 is a Zynq-7000 development kit intended to provide users with the ability to develop hardware and software applications for the Zynq-7000 SoC. The TySOM-1-7Z030 comes equipped with many great features and peripherals including the Zynq-7000 SoC, multimedia peripheral connections, and communication interfaces.
TySOM-1, TySOM™ EDK Technical Specification
TySOM-1-7Z030 Quick Start Guide   
How to prepare the TySOM-1-7Z030 including board programming and booting operating system.
TySOM-1, TySOM™ EDK Tutorials
TySOM-1-7Z030 Reference Design Part 1: Creating Hardware    
Details BASIC, ADVANCED BASIC, MEDIA, CAM-2-LCD STREAMING, and ALL-IN-ONE HDMI/LCD Embedded System Design.
TySOM-1, TySOM™ EDK Tutorials
TySOM-1-7Z030 Reference Design Part 2: Embedded Linux Setup Guide   
Describes how to prepare a microSD card to use as a boot medium for running embedded Linux on a TySOM board, the two main options to set the root file system for an embedded Linux operating system, U-Boot as a second stage boot loader for an embedded Linux OS, etc.
TySOM-1, TySOM™ EDK Tutorials
TySOM-1-7Z030 Technical Specification    TySOM-1, TySOM™ EDK Technical Specification
TySOM IoT Gateway with Amazon Cloud Tutorial - TySOM-1-7Z030    
Internet of Things applications require fast, encrypted, and safe internet communication channels to send data and communicate with other devices. The best solution for this purpose is the cloud. This document describes all necessary steps to use Amazon Cloud in IoT applications with TySOM as an IoT gateway.
TySOM-1, TySOM™ EDK Tutorials
Web Server Tutorial - TySOM-1-7Z030    
Internet of Things (IoT) gateways utilize various sensors and actuators as well as communication interfaces to collect and transmit data. Some applications require a method to present data to users and store them in memory. One of the simplest ways to accomplish this goal is to use LAMP (Linux Apache MySQL PHP) servers. This document will describe the process of installing and configuring LAMP web servers using the Aldec TySOM-1-7Z030.
TySOM-1, TySOM™ EDK Tutorials
Wireless Sensor Tutorial - TySOM-1-7Z030    
The TySOM IoT Gateways have a wide range of use, some gateways can provide web server capability, and some can be connected to sensors and actuators. Wireless interfaces are often used when connecting sensors and actuators to a gateway. The main goal of this document is to describe how one can use wireless interfaces such as Bluetooth and Z-wave to communicate with sensors.
TySOM-1, TySOM™ EDK Tutorials
18 results
Ask Us a Question
x
Ask Us a Question
x
Captcha ImageReload Captcha
Incorrect data entered.
Thank you! Your question has been submitted. Please allow 1-3 business days for someone to respond to your question.
Internal error occurred. Your question was not submitted. Please contact us using Feedback form.
We use cookies to ensure we give you the best user experience and to provide you with content we believe will be of relevance to you. If you continue to use our site, you consent to our use of cookies. A detailed overview on the use of cookies and other website information is located in our Privacy Policy.