HES7DB-SoC System-on-Chip Daughter Card

HES7DB-SoC daughter card was designed to extend capabilities of HES boards providing the ARM Cortex A9 dual-core CPU in a programmable Xilinx Zynq-7000 device. It also contains peripherals such as USB, Ethernet, Wi-Fi, HDMI that are commonly used in SoC designs. The three typical use cases of HES7DB-SoC board are as follows:

  1. Peripheral board for In-Circuit-Emulation and physical prototyping.
  2. SoC processor subsystem model where ARM Cortex A9 in Zynq module connects with the rest of the SoC emulated in main HES boards via AXI interconnect IP.
  3. Design testbench host where ARM Cortex A9 in Zynq module runs a testbench application that drives design under test emulated in HES boards via AXI interconnect IP.

The following block diagram shows the HES7DB-SoC daughter card connected with the HES7XV4000BPX. Configurations containing other HES boards with BPX backplane connectors are also available.

BLOCK DIAGRAM

HES7DB-SoC System-on-Chip Daughter Card

Xilinx Zynq-7000 & ARM Subsystem

  • Xilinx Zynq-7000 module ( XC7Z045-FFG676), dual core ARM Cortex A9 MPCore
  • 128MB of DDR3 (4x MT41J256M8HX-15E)
  • 4Gb of NAND Flash (MT29F4G08ABBDAH)
  • 64Mb of SPI Flash (W25Q64DW)
  • Micro-SD Card socket (up to 16GB Micro-SD cards supported)
  • ARM JTAG 20 pin connector

Components & Interfaces

  • 5x Gigabit Ethernet PHY (88E1116R)
  • Wi-Fi/Bluetooth module (WL1271)
  • USB 2.0 OTG (TUSB6020)
  • USB 2.0 Device (FT2232H)
  • USB 2.0 Host (FT311D) targeted at bridging external non USB devices to Android controlled portable devices.
  • HDMI 1.4 Out - 225 MHz High Performance Transmitter (ADV7511)
  • RS232 transceiver
  • Stereo audio codec (SGTL5000XNAA3)

Memories

  • DDR2 SO-DIMM
  • SPI Flash (W25Q64DW)
  • I2C Flash (4x M24M01)
  • NAND Flash (MT29F4G08ABBDAH) and socket for additional module
  • SD Card slot

Clocking

  • 2x oscillators 100 MHz, 200 MHz
  • 1x clock for SATA (150 MHz)

Connectivity

  • Full size BPX main board connector:
    • High speed (25 Gbps) connectors: MOLEX 76560 series (mates with 76150 series)
  • HDMI receptacle
  • USB 2.0 Standard A, B, Mini-B receptacles
  • 5x RJ45 ethernet receptacles
  • External I2C & SPI connector (10 pin)
  • 2x DB-9 connectors for RS232
  • GPIO connector (40 pin / 20 GPIO)
  • ARM debug connector - Cortex Debug+ETM
  • Analog audio Line-IN, Line-OUT connectors

Ask Us a Question
x
Ask Us a Question
x
Captcha ImageReload Captcha
Incorrect data entered.
Thank you! Your question has been submitted. Please allow 1-3 business days for someone to respond to your question.
Internal error occurred. Your question was not submitted. Please contact us using Feedback form.
We use cookies to ensure we give you the best user experience and to provide you with content we believe will be of relevance to you. If you continue to use our site, you consent to our use of cookies. A detailed overview on the use of cookies and other website information is located in our Privacy Policy.