Integration of Riviera-PRO with Active-HDL

Introduction

Active-HDL is provided with functionality for launching designs in other Aldec tools such as Riviera-PRO, Riviera-PRO VSimSA, and Active-HDL VSimSA. The functionality allows simulation of your desired design and allows you to switch between Active-HDL and other Aldec tools at different design stages, while still sharing the same design resources. Depending upon the specified options, the interface generates a set of macro files (.do files) to launch complete simulation in the selected tool. Additionally, for Riviera-PRO, a workspace and design files are created that define the design structure. Alternatively, the selected tool can be controlled by a custom macro containing all commands required for running compilation or simulation.

Note: The product-specific files are stored separately, which protects them from being overwritten, or mistakenly removed.

How to setup the interface

  1. Prior to specifying your settings in Active-HDL, verify that you have the latest version of Riviera-PRO installed on your machine.

  2. Open your desired design in Active-HDL

  3. Point to the Riviera-PRO installation directory:

    • Go to Tools | Preferences

    • Under the Simulation category, select Riviera-PRO

    • Browse for the proper installation directory

    Figure 1. Pointing to the Installation Directory within the Preference window

  4. Specify your Simulation Design Settings to point to Riviera-PRO as your simulator:

    • Go to Design | Settings

    • Under the Simulation category, select Riviera-PRO/VSimSA

    • Select Riviera-PRO as the simulator

    Figure 2. Riviera simulator settings

    Setting up interface options

    You have the option of Generate macro or Use custom macro.

    • The Generate macro option controls the external simulator by means of generic macro files created by Active-HDL. The macro files are responsible for controlling particular stages of design processing (e.g. preparing a design structure for the selected simulator, compilation, initialization of simulation, etc.). The sequence of launching the macros is defined in the main macro file (run.do), stored in the design folder. Under this option you can:

      • Map additional libraries by pointing to the desired library.cfg file.

      • Start simulation after compilation enables simulation to start after compilation. When this option is disabled, the process will stop after compilation.

      • If you choose to Start simulation after compilation, you can choose to log signals and specify log command arguments.

    • The Use custom macro option allows you to choose a custom macro file to run the simulation. In this macro file, you can include opening a new waveform window and adding signals to the waveform so you do not have to do so manually.

    How to run the process

  5. Run the simulation using the designated Aldec Simulator:

    • In the Simulation menu, select Run in Aldec Simulator

    Figure 3. Running the Riviera-PRO Simulation from the Active-HDL Simulation menu

  6. View your simulation in Riviera-PRO

Figure 4. Simulation results in Riviera-PRO

If you chose the Generate macro option, you will have to add the waveform viewer window manually.

Manually opening the simulated waveform

In the Design Manager window, you can observe the workspace and design created along with all of your source files. You can also observe the generated macro files (run.do, create_workspace.do, compile_workspace.do, initialize_simulation.do, log_signals.do, and run_simulation.do).

Figure 5. Generated macro files

For future usage, you can modify the macro files and use them to run your simulations.



Printed version of site: www.aldec.com/jp/support/resources/documentation/articles/1278