What is the purpose of the S2 DIP switches?
The S2 DIP switches are connected to the FPGA_PROG chip. They are intended for the control module loaded into the Spartan-6 FPGA chip configuration, by default. (Reset signal, Status LEDs configuration, etc)
2260 Corporate Circle
Henderson, NV 89074 USA
Tel: +1 702 990 4400
Fax: +1 702 990 4414
©2020 Aldec, Inc.
Printed version of site: www.aldec.com/en/support/resources/documentation/faq/1558