Show Event Source
A powerful waveform to source code cross probing feature called Show Event Source is available during the simulation. To enable it go to Design | Settings | Trace/Debug and check Enable Show Event Source option. After that, you may right click on an event on the waveform to view the HDL driver responsible for that event.
Note: If you click on a bus then Show event source is greyed out, but if you expand the bus and click on an individual bit then you will be able to use Show event source functionality.
Aldec, Inc.
Corporate Headquarters
2260 Corporate Circle
Henderson, NV 89074 USA
Tel: +1 702 990 4400
Fax: +1 702 990 4414
https://www.aldec.com
©2024 Aldec, Inc.
Corporate Headquarters
2260 Corporate Circle
Henderson, NV 89074 USA
Tel: +1 702 990 4400
Fax: +1 702 990 4414
https://www.aldec.com
©2024 Aldec, Inc.
Printed version of site: www.aldec.com/en/support/resources/documentation/faq/1153