Port Declaration Orders
Why don't the signals inside blocks on a block diagram (bde) follow the exact same order as representative in the corresponding Verilog/VHDL source code?
Signal order inside the blocks will appear in the same order as in Verilog/VHDL source code for Active-HDL 8.3 and later versions.
2260 Corporate Circle
Henderson, NV 89074 USA
Tel: +1 702 990 4400
Fax: +1 702 990 4414
©2020 Aldec, Inc.
Printed version of site: www.aldec.com/en/support/resources/documentation/faq/1135