Disabling No license for Verilog Performance Optimized Simulation Message

Description:

How can I disable the following message during initialization of my simulation?

ELBREAD: You do not have a license to run Verilog performance optimized simulation.

Solution:

Verilog Optimization feature applies to Verilog or Mixed designs. It also applies if your design includes any Xilinx SecureIP components. Here is how you can disable the optimization attempt and the related notification.

1. Please make sure you have your design loaded.

2. Go to Design -> Settings menu, expand Simulation category.

3. Click on Verilog. On the right side, uncheck Verilog Optimization checkbox and click Apply and OK.

4. Recompile your design.

5. Now, when you initialize simulation you should not see the message.