TySOM-2A Embedded Prototyping Board

Product Description

TySOM-2A is a compact prototyping board containing mid-range Zynq-7000 module (Z-7030). It is designed to assure flexibility in selecting peripherals due to leveraging the larger chip package (FFG676) with 250 I/O and 4 GTX transceivers and providing one FMC-HPC connector that enables use of expansion daughter cards. Standard peripherals like DDR3 RAM, USB and HDMI used by ARM CPU Processing System are contained in that board so the Linux OS or another Real Time Operating System (RTOS) can be booted out of the box without any additional hardware components. The OS and software executed by ARM Cortex CPU have 1GB of DDR3 RAM for their disposal and can use up to 32GB of SSD storage in Micro-SD card. Communication and networking is enabled by the Gigabit Ethernet PHY with RJ45 connector and Wi-Fi/Bluetooth module. Standard peripherals can be attached to the USB 2.0 Hub that provides 4 USB ports. There is also a HDMI codec on the board to connect this TySOM mini computer to a monitor. Most of the FPGA I/O ports are routed to one FMC-HPC socket providing total of 144 I/Os and 4 GTX lines. Thus, additional devices can be connected as FMC Daughter Cards that are provided by Aldec and other vendors.

BLOCK DIAGRAM

Essential Features

Chipset / SoC

  • Xilinx Zynq-7000 XC7Z030 (FFG676)
  • Dual core ARM Cortex-A9 MPCore
  • 2x XADC - 12-bit, 1MSPS Analog to Digital converter
  • FPGA: Kintex-7 architecture
    • 125K Logic Cells, 157K Flip-Flops, 9.3Mb RAM, 400 DSP

Memory

  • 1GB RAM - DDR3
  • Micro-SD support up to 32GB
  • 128Mb SPI Flash Memory
  • 64 Kb EEPROM

Interfaces

  • Gigabit Ethernet PHY with RGMII interface (88E1116R) and RJ45 connector
  • Additional industrial grade Gigabit Ethernet PHY with RGMII interface (DP83867CR) connected to Zynq PL, supporting IEEE 1588 precision clock synchronization.
  • Wi-Fi/Bluetooth module (WL18370MOD)
  • 4x USB 2.0 ports with Hub controller (USB2514B) and Transceiver (TUSB1210)
  • UART to USB bridge (CP2103) with Mini-USB B type connector
  • Xilinx JTAG Connector for Zynq PL

Multimedia

  • HDMI 1.4 Out - 225 MHz High Performance Transmitter (ADV7511)

Miscellaneous

  • 8x User Dip Switches
  • 4x User LEDs
  • Reset Pushbuttons for PL & PS
  • RTC Module (Real Time Clock)
  • Accelerometer
  • Temperature Sensor
  • XADC connectors (pair of MMCX and gold-pin with 7 differential inputs)

Dimensions

Ask Us a Question
x

Ask Us a Question

x
Captcha ImageReload Captcha
Incorrect data entered.
Thank you! Your question has been submitted. Please allow 1-3 business days for someone to respond to your question.
Internal error occurred. Your question was not submitted. Please contact us using Feedback form.