TySOM-3 Embedded Prototyping Board

Product Description

TySOM-3-ZU7 is a compact prototyping board containing Zynq® UltraScale+™ MPSoC device which provides 64-bit processor scalability while combining real-time control with soft and hard engines for graphics, video, waveform, and packet processing. Xilinx Zynq UltraScale+ ZU7EV-FFVC1156 MPSoC contains a Video Codec Unit which supports H.264/H.265, and also it has the biggest FPGA in the UltraScale+™ MPSoC family. This chip includes a Quad-core ARM Cortex-A53 as an Application Processing Unit, Dual-core ARM Cortex-R5 as a Real-Time Processing Unit and ARM Mali-400 MP2 as a Graphics Processing Unit. TySOM-3-ZU7 is designed to assure flexibility in selecting peripherals because of leveraging all the features of the Zynq UltraScale+ ZU7EV-FFVC1156 MPSoC chip. This prototyping board contains 4 GB DDR4 Memory for the Programmable Logic (PL) and support DDR4 SODIMM Memory for the Processing System (PS). This board includes 2 Gb NAND Memory and supports up to 32GB of SSD storage in Micro-SD card. Communication and networking is enabled by ×2 Gigabit Ethernet, Wi-Fi & Bluetooth, CAN, Pmod, 4× USB 3.0, USB to UART Bridge, SATA and QSFP+ connector. Multimedia interfaces are provided using DisplayPort, HDMI IN/OUT. To expand the peripherals, 2× FMC (1× HPC and 1× LPC) VITA 57.1-2010 compliant are provided on the board. Thus, additional devices can be connected as FMC Daughter Cards that are provided by Aldec and other vendors.

BLOCK DIAGRAM

Essential Features

Chipset / SoC

  • Xilinx Zynq UltraScale+ ZU7EV-FFVC1156 MPSoC
  • Quad-core ARM Cortex-A53 as an Application Processing Unit 
  • Dual-core ARM Cortex-R5 as a Real-Time Processing Unit
  • Video Codec Unit
  • 2x XADC - 12-bit, 1MSPS Analog to Digital converter
  • FPGA: ZU7EV
  • 504K Logic Cells, 157K Flip-Flops, 38Mb RAM, 1728 DSP

Memory

  • 4Gb RAM – DDR4 Programmable Logic
  • DDR4 SODIMM Memory for the Processing System
  • 2 Gb NAND Memory
  • Micro-SD support up to 32GB
  • 256Mb QSPI Flash Memory
  • 64 Kb EEPROM

Interfaces

  • 2× Gigabit Ethernet PHY DP83867CR
  • Wi-Fi/Bluetooth module (WL18370MOD)
  • 4x USB 3.0 ports 
  • SATA
  • CAN
  • QSFP+
  • Pmod connector
  • UART to USB bridge (CP2103) with Mini-USB B type connector
  • Xilinx JTAG Connector for Zynq PL

Multimedia

  • HDMI 2.0 Out - TE Connectivity 1888811-1
  • HDMI 2.0 IN - TE Connectivity 1888811-1
  • DisplayPort

Miscellaneous

  • 4x User Dip Switches
  • 6x User LEDs
  • Reset Pushbuttons for PL & PS
  • Accelerometer
  • Temperature Sensor
  • SYSMON
  • Curent monitor

Dimensions

Ask Us a Question
x
Ask Us a Question
x
Captcha ImageReload Captcha
Incorrect data entered.
Thank you! Your question has been submitted. Please allow 1-3 business days for someone to respond to your question.
Internal error occurred. Your question was not submitted. Please contact us using Feedback form.
We use cookies to ensure we give you the best user experience and to provide you with content we believe will be of relevance to you. If you continue to use our site, you consent to our use of cookies. A detailed overview on the use of cookies and other website information is located in our Privacy Policy.